渤海湾盆地沙垒田地区新近纪走滑断裂发育特征及其对油气富集的控制作用

沙垒田凸起地区是渤海海域西部新近系油气最为富集的区域，为了明确新近系走滑断裂发育特征及对油气富集的控制作用，依托连片高精度三维地震、钻井取心等资料，对走滑断裂类型及发育特征进行了详细刻画，并对走滑断裂与成藏要素之间的关系进行了探讨。综合研究表明：研究区发育断穿基底走滑断裂、盖层走滑断裂及伸展-走滑断裂三种不同类型走滑断裂；走滑断裂对圈闭的控制作用表现为在不同类型走滑断裂控制下，断裂带内及断裂带间形成了多种类型圈闭，其中大型披覆背斜圈闭、断鼻、断背斜圈闭为有利圈闭，小型断块圈闭为不利圈闭；走滑断裂对输导体系的控制作用体现在断裂活动控制了骨架砂体输导体系及断裂输导体系的形成发育，有利于周边凹陷成熟烃源岩排烃及运移输导；走滑断裂对储层的控制作用表现为走滑作用形成的高角度裂缝提高了储层渗透率，改善了储层物性。新近纪普遍发育的走滑断裂是研究区油气富集的主控因素。     

石墨烯增强钛基复合材料制备工艺与性能研究

以多层石墨烯为增强体,通过熔炼锻造(MF)和粉末冶金(PM) 2种工艺分别制备出规格为Φ10 mm的石墨烯增强钛基复合材料棒材。石墨烯在凝固过程中以TiC枝晶形态析出,变形后呈细小颗粒,其中Ti和C原子比约为2∶1。石墨烯和球形钛粉经过机械合金化和变形加工,在基体中反应形成薄片层。MF工艺对应的棒材拉伸强度可达476 MPa,延伸率保持在28%; PM工艺对应的棒材拉伸强度可达487 MPa,延伸率保持在30%。PM工艺可形成尺寸较小的薄片状石墨烯增强体,强化作用提升,同时塑性没有显著下降。     

Protection through property: from private to river-held rights

ABSTRACT

This article explores how private owners can protect bodies of water through private property rights. It compares the use of conventional property rights in the Netherlands and New Zealand with a novel approach whereby a New Zealand river owns itself.     

高强WSTi544221合金组织与性能研究

研究了轧制变形量对WSTi544221合金棒材显微组织和力学性能的影响,并对Φ10 mm规格的棒材进行不同制度的固溶+时效处理,对比了不同热处理状态下棒材的组织和力学性能。结果表明,随着轧制变形量的增大,WSTi544221合金棒材的晶粒细化程度增大,强度逐渐提高,但塑性变化不大。经870℃×1 h/WC+520℃×6 h/AC固溶+时效处理后,强度与塑性可以获得良好匹配,当抗拉强度达到1 610 MPa、屈服强度达到1 531 MPa时,延伸率和断面收缩率可分别保持在12%和43%。     

Proteome analysis of tissues by mass spectrometry

Tissues and biofluids are important sources of information used for the detection of diseases and decisions on patient therapies. There are several accepted methods for preservation of tissues, among which the most popular are fresh‐frozen and formalin‐fixed paraffin embedded methods. Depending on the preservation method and the amount of sample available, various specific protocols are available for tissue processing for subsequent proteomic analysis. Protocols are tailored to answer various biological questions, and as such vary in lysis and digestion conditions, as well as duration. The existence of diverse tissue‐sample protocols has led to confusion in how to choose the best protocol for a given tissue and made it difficult to compare results across sample types. Here, we summarize procedures used for tissue processing for subsequent bottom‐up proteomic analysis. Furthermore, we compare protocols for their variations in the composition of lysis buffers, digestion procedures, and purification steps. For example, reports have shown that lysis buffer composition plays an important role in the profile of extracted proteins: the most common are tris(hydroxymethyl)aminomethane, radioimmunoprecipitation assay, and ammonium bicarbonate buffers. Although, trypsin is the most commonly used enzyme for proteolysis, in some protocols it is supplemented with Lys‐C and/or chymotrypsin, which will often lead to an increase in proteome coverage. Data show that the selection of the lysis procedure might need to be tissue‐specific to produce distinct protocols for individual tissue types. Finally, selection of the procedures is also influenced by the amount of sample available, which range from biopsies or the size of a few dozen of mm² obtained with laser capture microdissection to much larger amounts that weight several milligrams.     

Clean hydrogen production in a full biological microbial electrolysis cell

The recent interest in microbial electrolysis cell (MEC) technology has led the research platform to develop full biological MECs (bioanode-biocathode, FB-MEC). This study focused on biohydrogen production from a biologically catalyzed MEC. A bioanode and a biocathode were initially enriched in a half biological MFC (bioanode-abiocathode, HB-MFC) and a half biological MEC (abioanode-biocathode, HB-MEC), respectively. The FB-MEC was established by transferring the biocathode of the HB-MEC and the bioanode of the HB-MFC to a two-chamber MEC. The FB-MEC was operated under batch (FB-MEC-B) and recirculation batch (FB-MEC-RB) modes of operation in the anodic chamber. The FB-MEC-B reached a maximum current density of 1.5 A/m² and the FB-MEC-RB reached a maximum current density of 2.5 A/m² at a similar applied voltage while the abiotic control system showed the maximum of 0.2 A/m². Hydrogen production rate decreased in the FB-MEC compared to that of the HB-MEC. However, the cathodic hydrogen recovery increased from 42% obtained in the HB-MEC to 56% in the FB-MEC-B and 65% in the FB-MEC-RB, suggesting the efficient oxidation and reduction rates in the FB-MEC compared to the HB-MEC. The onset potential for hydrogen evolution reaction detected by linear sweep voltammetry analysis were −0.780 and −0.860 V vs Ag/AgCl for the FB-MEC-RB and the FB-MEC-B (−1.26 for the abiotic control MEC), respectively. Moreover, the results suggested that the FB-MEC worked more efficiently when the biocathode and the bioanode were enriched initially in half biological systems before transferring to the FB-MEC compared to that of the simultaneously enriched in one system.     

Surface modification of TiO2 particles with 12-hydroxy stearic acid and the effect of particle size on the mechanical and thermal properties of thermoplastic polyurethane urea elastomers

The efficient surface modification of titanium dioxide (TiO₂) particles with different sizes was first carried out with “water only method” (Appl. Surf. Sci. 2018, 447, 664–672) developed in our group using 12-hydroxy stearic acid (12-HSA) as the modifier. The 12-HSA-modified TiO₂ particles with different sizes were then used to explore their effect on the mechanical and thermal properties of a thermoplastic polyurethane urea (TPUU) elastomer with superior mechanical and thermal properties produced newly in our lab using nonsymmetric alicyclic diisocyanate and diamine. Orthogonal experimental results showed that the order of impact of each factor on the modification efficiency of TiO₂ particles was: Temperature > time > modifier content. It was found that, in the nanometer (≤100 nm) range, smaller particles were more helpful to enhance the tensile strength of the TPUU elastomer, while larger ones to increase more significantly the elongation at break. Besides, the TiO₂/polyurethane urea nanocomposites exhibited much better thermomechanical performance than the pristine TPUU elastomer, and the thermomechanical performance of the nanocomposites increased with decreasing particle size.     

Multi-Functional Black Bioactive Glasses Prepared via Containerless Melting Process for Tumor Therapy and Tissue Regeneration

Tissue regeneration in complex lesions such as the site of tumors, bacterial infection, and sites lacking blood vessels, has been a huge challenge. Therefore, developing bioactive implantable materials with multi-functional properties such as tumor destruction, bacteria growth inhibition, and angiogenesis promotion is of great significance. In this study, black CaO-SiO₂-TiO₂ (CST) glasses are prepared through the containerless melting approach, by which heterogeneous nucleation can be avoided and thereby glass formation becomes possible via fast quenching. This approach enables the formation of trivalent titanium (Ti³⁺) without using a reducing atmosphere or reducing agents. The black CST glasses are found in this study to possess a strong ability to inhibit bacteria and tumors by their excellent photothermal and photocatalytic effects. Strikingly, these glasses also promote the formation of blood vessels and accelerate the healing of chronic wounds by the synergistic effects of the photothermal effect and Si ions. Thus, this glass system can be a promising multi-functional material for tissue regeneration in complex lesions.